Tramex BSIZK5.1 EZ Building Inspection Kit for Moisture Mapping and Environmental Monitoring
- 12 months limited warranty
- 6 x Hole liners and caps
- Heavy-duty pin-type wood probe
- 7" (200mm) insulated pins for in-depth penetration using pin probe
Tramex Building Survey Inspection EZ Kit – Portable Moisture & Humidity Meter
Ideal for Quickly Detecting Moisture in Buildings and Materials
The Tramex BSIZK is a handheld, non-invasive kit for measuring moisture and humidity in drywall, wood, plaster, brick, ceramic tiles, laminates, roofing, and other construction materials. It helps identify hidden damp conditions that can lead to mold, microbial growth, or wood damage.
Comprehensive Moisture Detection
Hidden moisture behind walls or under flooring can go unnoticed without proper tools. The Tramex digital MRH III, paired with the reusable Ambient Relative Humidity Hygro-i2 Short Probe, measures relative humidity, temperature, and dew point to pinpoint moisture issues. Once identified, appropriate remedial actions can improve building health.
Accurate Probing for Wood and Concrete
The heavy-duty pin probes measure wood moisture with insulated 7.8" pins for deep wall cavity access. Concrete slab relative humidity can be tested using the reusable RH probe with included hole liners. The kit is stored in a durable Tramex Easy-travel case for portability.
Features of MRH III:
- Non-destructive signal penetration up to 30mm in wood and drywall.
- Measures moisture through paint, wall coverings, tiles, floor coverings, wood, and most building materials.
- Hold function freezes readings when the meter face isn’t visible.
- Audio alarm signals high moisture readings.
- Backlit digital display for easy, meaningful readings.
- Accurate non-invasive moisture content readings from 5–55% in wood.
- Attachable pin probe for hard-to-reach areas and wall cavity testing.
- Attachable RH probe for in situ or hood testing of concrete, measuring relative humidity, temperature, dew point, and grains per pound.
Kit Contents:
- MRH III – moisture and humidity meter
- 1 x Ambient Relative Humidity Hygro-i2 Short Probe
- 6 x Hole liners and caps
- Heavy-duty pin-type wood probe
- 7" (200mm) insulated pins for in-depth penetration with pin probe
To broaden your professional inspection toolkit
For comprehensive moisture surveying of walls, floors, ceilings and a variety of building materials, consider additional instruments that support deeper and more flexible site analysis. The Tramex Building Survey Inspection Kit expands capability with both non‑destructive and pin‑type moisture probes plus relative humidity measurement for more detailed building envelope diagnostics. For applications requiring deeper scanning of roofing and wall substrates, the Tramex Roof & Wall Scanner delivers versatile non‑destructive moisture detection and leak tracing performance in complex structural materials. Additionally, the Tramex Roofing Master Kit provides a comprehensive suite of tools including roof‑specific scanners and probes for advanced moisture surveying, leak tracing and insulation evaluation on flat roof systems and waterproofing assemblies.
Q&A
What materials can the Tramex BSIZK test?
It can measure moisture in drywall, wood, plaster, brick, ceramic tiles, laminates, roofing, and other building materials.
Can it detect hidden moisture behind walls?
Yes, the non-invasive MRH III meter identifies moisture without damaging surfaces, revealing hidden damp conditions.
Is the kit suitable for concrete testing?
Yes, the reusable RH probe allows in situ or hood testing of concrete slabs for relative humidity, following international standards.
What makes this kit better than other moisture meters?
Its combination of non-invasive and pin-probe capabilities, along with RH testing, provides accurate results in wood, concrete, and air spaces, all in a portable, easy-travel case.
MRH3 - Measuring range:
| Depth of penetration: | up to 1¼"(30mm)(In wood, drywall) |
| Reference scale for building materials: | 0 to 100 |
| Relative Humidity (with optional Hygro-i2 ® probe): | 0 to 99% |
| Wood Non-invasive Mode: | 5 to 55% MC (at SG of 0.3) |
| Wood Invasive Mode (with optional wood pin probes): | 7 to 40%MC |
Hygro-i2 Short Probe - Relative Humidity Sensor Specifications:
| Range: | 0 to 100%RH |
| Accuracy: | 0% to 99%RH ±2.0%RH (@ 77ºF (25ºC)) |
| Resolution: | 0.1% over the complete range |
| Drift: | <0.25%RH per year |
Hygro-i2 Short Probe - Temperature Sensor Specifications:
| Range: | -40ºF to 257ºF (-40ºC to 125ºC) |
| Accuracy: | ±0.1ºF Range 68ºF to 140ºF |
| (±0.1°C Range 20°C to 60°C) | |
| Sensor Protection: | PTFE Film protects sensor opening from water & dust |
| Drift: | <0.04ºF (0.03ºC) per year |
| NIST traceable. | (National Institute of Standards and Technology) |
Specifications of Kit:
| Size: | 13.8" x 9.1" x 3.5" (350mm x 230mm x 90mm) |
| Weight: | 3.4lbs (1.55kg) |
| Power: | 1 x 9 volt PP3 Battery (included) |
| Price | $USD 1,235.00 |
|---|
Need larger scale equipment for a bigger project?
Our parent site geneq.com works by quote requests, so we can offer a unique price per any combination of items you choose, and the best shipping company/route for weighty items. We distribute the biggest names in the industry since 1972!
