Tramex tech kit for installing concrete coatings

A compact test kit for measuring moisture content and dew-point of concrete floors and slabs prior to coatings application.

This kit is perfect for immediate, non-invasive, quantitative moisture level assessment of concrete surfaces and environmental conditions. Created to track the essential data during application, it employs Gravimetric testing as a standard and comparative testing according to ASTM F2659.

Kit Contents

1. Concrete Moisture Encounter 5 - CME5
2. Feedback Datalogger DL-RHTA
3. Free App available for Android and iOS (phone not included)
4. Contact Temperature Probe
5. Extension Handle

The Tramex Feedback Datalogger is used for testing, monitoring, and time-logging ambient relative humidity, temperature, and dew point. The Tramex Concrete Coatings Installer Tech Kit comes with an extension handle in a Tramex Easy-travel case. Bluetooth connectivity to the Tramex Meters App allows for visualization of readings and data reporting to mobile devices. GeoTag tests results, creating, saving, and sharing photos, reports, and charts, as well as seeing your meter screen on your phone when extending to hard-to-reach places. The Contact Temperature (Determinator Probe). 

CMEX5 allow for a unified gravimetric-based and testing method of moisture content both on the surface and within the body of the concrete. %MC readings for both the in-situ and the non-destructive surface tests eliminate confusion between different testing method data. The Determinator conductive probes are reusable, extendable, and require no plastic hole liners. The hole diameter required is the same for the Hygro-i2 RH test as per F2170.

Depth of Penetration:

• 1 1/4” (3cm) probe depth for concrete between 2” to 4” (5 to 10cm)

• 2 1/4” (5.7cm) probe depth for concrete between 4” to 6” (10 to 15cm)

• 3 1/4” (8.3cm) probe depth for concrete between 6” to 9” (15 to 22cm)

• 4 1/4” (10.8cm) probe depth for concrete between 9” to 11” (22 to 28cm)

To support rigorous moisture assessment prior to coatings application, pair the Inspector Kit with other Tramex solutions tailored to jobsite conditions. For broader restoration and structural diagnostics, the Tramex Water Damage Restoration Tech Kit enables non‑invasive quantitative moisture measurements across multiple building substrates, enhancing workflow efficiency. Additionally, when surface and ambient environmental data logging is required for documentation and quality control, the Tramex Feedback Data Logging Thermometer‑Hygrometer delivers extended Bluetooth‑enabled measurement capabilities for relative humidity, temperature, and dew point, facilitating comprehensive reporting and analysis on coatings readiness.