Tramex flooring inspector kit
- 12 months limited warranty
- Non-destructive
- 0-6.9% concrete MC reading range
- Extension handle
Comprehensive Flooring Moisture Inspection Kit for Concrete and Wood
Fast, Accurate, and Non-Destructive Moisture Testing for Flooring Professionals
The Tramex Flooring Inspector Kit is designed for contractors, flooring specialists, and building inspectors who need fast, reliable, and non-invasive moisture measurements. With this kit, both concrete and wood flooring can be tested for moisture content, while RH and dew point assessments ensure accurate site condition evaluation prior to flooring installation.
This kit combines the CMEX5 digital moisture meter with Hygro‑i2 relative humidity probes, allowing flooring installers and concrete contractors to check slab readiness before installation. This combination supports ASTM F2659 and ASTM F2170 testing standards, helping professionals ensure floors meet moisture limits and reduce the risk of failures.
Installers and building inspectors value the kit for measuring concrete and wood moisture, surface temperature, and dew point while logging data via the Tramex Meters App. This Tramex overview of flooring inspection kits highlights how these features provide a more complete assessment than basic meters, improving quality control and supporting documented project compliance.
Key Features
- Non-destructive quantitative testing of concrete using Gravimetric reference and ASTM F2659 comparative testing
- Reusable Hygro-i2 RH probes for accurate in-situ relative humidity measurements in concrete slabs
- Heavy-duty wood pin-probe for moisture evaluation in wood surfaces
- Infrared surface thermometer for surface temperature and dew point checks
- Extension handle and rugged Tramex travel case for portability and ease of use on-site
- Bluetooth connectivity with the Tramex Meters App for live data visualization, GeoTagging, reports, and mobile device integration
Q&A
What materials can the Flooring Inspector Kit test?
It can test concrete for moisture content and relative humidity, as well as wood for moisture levels.
Can I measure relative humidity according to ASTM standards?
Yes, the Hygro-i2 probes allow ASTM F2170-compliant relative humidity testing in concrete slabs.
Does it allow remote data viewing?
Yes, the kit connects via Bluetooth to the Tramex Meters App for visualization, reports, and GeoTagged data on mobile devices.
Is the kit portable for job sites?
Absolutely; it comes in a heavy-duty Tramex travel case with an extension handle for easy handling and transport.
| Depth of penetration in concrete: | approx. ¾" (20mm) |
| Moisture content for Concrete: | 0 → 6.9 % |
| Comparative for Gypsum floor screed: | 0 → 12 |
| CM Equiv Anhydrite/Concrete: | 0→2.7 / 0→4.3 |
| Reference scale: | 0 → 100 |
| Relative Humidity: | 0 → 99% |
| (with optional Hygro-i2 ® probe): | Humidity accuracy: 0% → 99%RH +/- 2% @ 25°C / 77°F |
| Moisture content for wood (with optional wood pin probes): | 5 → 30 % |
| Temperature range: | -58ºF ~ 1202ºF (-50 to 650 ºC) |
| Distance to Spot ratio: | D:S = 12:1 |
| Display resolution: | 0.1 ºF(0.1ºC) <1000 1ºC >1000 |
| Accuracy for targets: | Assumes ambient operating temperature of 73 to 77ºF (23 to 25 ºC) -58ºF ~ 68ºF (-50 ~ 20ºC) ±4.5ºF (2.5ºC) 68ºF ~572ºF (20ºC ~300ºC) ±1.0% ± 1.8ºF (1.0ºC) 572ºF ~ 1202ºF (300ºC ~650ºC) ±1.5% |
| Repeatability: | -58~68ºF (-50~20ºC) : ± 2.3ºF (1.3ºC) 68~1202ºF (20~650ºC) : ±0.5% or ±0.9ºF (0.5ºC) |
| Response time: | 150ms |
| Spectral response: | 8~14um |
| Emissivity: | Digitally adjustable from 0.10 to 1.0 |
| Over range indication: | LCD will show “----” |
| Polarity: | Automatic (no indication for positive polarity); Minus (-) sign for negative polarity |
| Diode laser output: | <1mW,Wavelength 630~670nm, Class 2 laser product |
| Operating temp.: | 32 to 122ºF ( 0 to 50ºC) |
| Storage temp.: | 14 to 140ºF (–10 to 60ºC) |
| Relative humidity: | 10%~90%RH operating, <80%RH storage |
| Power supply: | 9V battery, NEDA 1604A or IEC 6LR61, or equivalent |
| Safety: | “ CE ” Comply with EMC |
| Size: | 17.1” x 14.2” x 5.5” (43.5cm x 36cm x 14cm) |
| Weight: | 8.6 lbs (3.9kg) |
| Power: | 2 x AA batteries, 1 x 9 volt PP3 battery |
| Price | $USD 1,760.00 |
|---|
Need larger scale equipment for a bigger project?
Our parent site geneq.com works by quote requests, so we can offer a unique price per any combination of items you choose, and the best shipping company/route for weighty items. We distribute the biggest names in the industry since 1972!
