Plastic Rain Gauge

The rain gauge plastic ALL Weather, P-2000 is made of butyrate-based plastic and can measure up to 280 mm of precipitation.

The funnel of the upper part of the unit receives the water that flows to the measuring tube inside. The tube has a capacity of 25.4 mm. Precipitation of less than 25.4 mm can be read directly on the tube. If they exceed 25.4 mm, the surplus is discharged into an outer cylinder and is then measured by pouring into the measuring tube. In the case of snow precipitation measurements, the funnel and the tube to be measured is removed. The diameter of the gauge orifice is 102 mm and its height is 355 mm.