Data logger

Lascar Data logger for Application-Based Model Selection

Useful for cold-chain documentation, environmental monitoring, museums, storage rooms, facilities management, and validation workflows, where the right choice often depends on differences in sensor type, communication method, channel configuration, and deployment conditions. 

Supplied with a K Type probe, its measurement range out of the box is from 0 to 200°C (32 to 392°F). Easily set up the logger and view downloaded data by plugging the unit into a PC’s USB port and using the free EasyLog software provided. Data can then be graphed, printed and exported to other applications for detailed analysis. Supplied with ½ AA battery, K-type probe and wall mount clip. The user can quickly install the logger and access collected data by connecting the data logger to a PC's USB port and utilizing the complimentary EasyLog software. The data can subsequently be charted, printed, and transferred to other applications for in-depth analysis. The data logger comes with a lithium metal battery that usually provides a logging life of 2 years.

Compatible with K, J, and T-type thermocouples

• Compatible with K, J, and T-type thermocouples with miniature thermocouple plug connection
• Stores over 32,000 readings
• EasyLog software available as a free download
• Supplied with 1.5m K-type thermocouple probe with 0 to 200°C (32 to 392°F) measurement range
• Logging rates between 1 second and 12 hours
• Immediate and delayed logging start
• User-programmable alarm thresholds
• Status indication via red and green LEDs

EasyLog USB Data Logger Setup

Lascar EL-USB-2-LCD - For temperature, relative humidity, and dew point

The user can easily configure the recorder and view the downloaded data by plugging it into a PC's USB port and using the free EasyLog software. The data, including the calculated dew point, can then be graphically represented, printed and exported to other applications for detailed analysis. The high-contrast LCD monitor can display a variety of temperature and humidity information. At the touch of a button, the user can switch between the current temperature and humidity and the maximum and minimum values recorded for temperature and humidity. The data logger is supplied with a lithium metal battery, which gives it a lifetime of up to 2 years. The recorder is protected against water and dust ingress according to IP67 when the cap is installed.

Features

• Measuring range from -35 to + 80 ° C (-31 to + 176 ° F) and from 0 to 100% RH
• Stores more than 16,000 temperature and humidity readings
• EasyLog software available for free download
• High-contrast LCD with two-and-a-half digit temperature and humidity display
• Recording rate between 10 seconds and 12 hours
• Immediate, delayed, and push-to-start logging
• User-programmable alarm thresholds for temperature and humidity
• Status indication by red/green LED
• Environmental protection according to IP67

Related Products

For complementary monitoring solutions, consider the Compact Rugged Temperature Data Loggers for versatile field measurements, the Pocket pH Meter for Beer for precise pH monitoring, or the Bread and Dough pH Tester for bakery and fermentation applications.

What types of thermocouples does this data logger support?

The logger is compatible with K, J, and T-type thermocouples, allowing flexible measurement across different environments and setups.

How many readings can the data logger store?

It can store over 32,000 readings, providing long-term monitoring without frequent data downloads.

How do I view and analyze the recorded data?

Data can be accessed by connecting the logger to a PC via USB and using the free EasyLog software. The software allows graphing, printing, and exporting to other applications for detailed analysis.

What is the battery life?

The supplied lithium metal battery typically lasts up to 2 years, depending on logging intervals and conditions.

Is the logger suitable for harsh environments?

The EL-USB-2-LCD variant is protected to IP67 standards when the cap is installed, making it resistant to water and dust ingress.

Can I set alarms for specific temperature or humidity thresholds?

Yes, the logger allows user-programmable alarm thresholds and indicates status via red and green LEDs.

QUICK TIP:

BATTERY INFORMATION

• We recommend that you replace the battery annually, or prior to logging critical data. Only use 3.6V ½AA lithium metal batteries. The data logger does not lose its stored readings when the battery is discharged or replaced; however, the data logging process will stop and will not resume until the battery is replaced and the logger restarted by EL-WIN-USB or an EL-DataPad.
• Before replacing the battery, remove the data logger from the PC. Please note that leaving the data logger plugged into the USB port for extended periods will cause some of the battery capacity to be lost.

Download Data Sheet Download Instruction Manual